(044) 565-57-95
Eng

News

17 April 2014
14 February 2014
17 May 2013

Technical characteristics

Characteristics

Mounting

Info-files

Density 30-50 g/m3;

Range of working temperature from -80 to +95 ;

Thermal conduction 0,033 Vt/m;

Acoustic absorptivity b = 0,04 (35d with thickness 5 mm);

resistance to heat transfer R = 0,8 - 1,2 2 /Vt;

Water absorptivity during 24 hours is 2,5 - 3% of weight;

Residual strain under preassure:

at 25% - not more then 7,5%

at 50% - not more then 15 %

Permittivity at current friquency 101 Hz is 1.15-1.18.

Vapor permeability coefficient m = 0,001 mg/m/h/Pa.

Depending on a thickness foam polyethylene Termoizol replaces:

,
291320225058128
418263844100115256
523334855125144320
836537788200230512
1045669611250288640
156899144165375346768

Heat-variable resistor laminated rolls "Termoizol" :

, R , ? ?/, R , ? ?/, R , ? ?/
40,80,71
100,970,871,2

Reflecting isolation diminishes the transmission of radiant energy due to the reflection of infra-red part of radiation of foil which is able to reflect about 97% of heat radiation. Reflecting isolation creates the effective insulating system ( the effect of thermos), reducing thermal losses on 70%indoors in winter and accumulation the warmth in summer. It can be used in a complex with a mass isolation, that increases efficiency of building heat-insulation in once or twice.