(044) 565-57-95

News

17 April 2014
14 February 2014
17 May 2013

Montage and installation

Этот же материал подробнее с иллюстрациями...

Roof and attic heat insulation

STEM DEFENSE

Montage and installation

The moisture from the attic can damage the roof.

WATER PROTECTION

Montage and installation

The humid air can penetrate into the roof construction; the declining of the temperature causes the steam condensate.

VENTILATION

There should be two ventilation layers.

Montage and installation

The first layer ventilates the roof; the second layer ventilates the waterproofing or the ceiling part and provide the ventilation over the heat insulation layer.

If the humid air penetrated, the ventilation system should take it out.

Foam polyethylene installation. Termoizol - general recommendation

The maximum effect is reached in case of the air space (1,5 - 2 sm) from the both sides of the foam polyethylene.

Montage and installation

Foam foiled insulation reflects up to 97% of the heat stream.

Montage and installation

The internal layer of the heat insulation of the roof (layer A) should be absolutely hermetic. That is steam and water-proofing layer.

The variants of the Termoizol installation in the attic.:Montage and installation

VARIANT №1: LAYER 1

VARIANT №2: LAYER 2

VARIANT №З: LAYER 1 + LAYER 2

If Termoizol is absent, condensate can appear and as the result the humid air can penetrate the under roof space.

Termoizol has the characteristics of the heat proofing and steamproofing. Its installation helps to avoid all the necessary effects.

Insulation of the floor and pipe

HEAT AND WATER PROTECTION

Montage and installation

Cold air from the basement can penetrate into the floor. The condensate can cause the damage from the floor.

HEAT LOSS

Montage and installation

Constructing the ventilation box, the absolute hermetic has a great importance. The insulation installing on the ventilation box prevents the heat loss.

HEAT AND HYDROPROTECTION OF THE PIPE

Montage and installation

While the pipe insulation, the temperature of the surrounding environment and the liquid in the pipe should be taken into account. If the insulation is made in the wrong way the corrosion and microflora can appear.

Termoizol Installation - General recommendations

Montage and installation

Avoid overlapping. The best variant is installation “in joint”. All installation sutures should be glued to provide the stem and waterproofing.

Remember: aluminum is a good conductor. Electric wiring should be protected.

Before installing be convinced of the reliability of the electric wiring.

Cement solutions are the aggressive environment for aluminum.

While installing “warm floors” use Termoizol with the protective metalized film.

Montage and installation

TERMOIZOL is used as the bottom layer under parquet, and also under any other floor layer.

Montage and installation

Insulation of the ventilations boxes prevents the heat loss.

Montage and installation

Insulations of hot and cold water tanks create additional conditions for energy efficiency.

Heat insulations of the walls

STEAM PROTECTION

Montage and installation

The absence of the steam insulations causes the vapour penetration in the elements of the wall and damage it.

Montage and installation

Air moisture in the form of the steam penetrate through the porosities and goes out as the condensate.

VENTILATION

Montage and installation

The ventilation of the construction should be provided to avoid the moisture accumulation.

Termoizol installation - genaral reccomendations

Montage and installation

The existence of the air space (1,5 - 2 sm) from the both sides of Termoizol provides the maximum effect.

Avoid overlapping.

The best variant is installation “in joint”. All installation sutures should be glued to provide the stem and waterproofing.

Remember: aluminum is a good conductor.

Electric wiring should be protected.

Before installing be convinced of the reliability of the electric wiring.

Termoizol protect walls from the moisture, sound, wind and keeps 97 % of heat.

Montage and installation

Light building constructions, for example, veranda or recessed balcony, you can provide with heat insulation according to this scheme.

Montage and installation

Installing termoizol, follow our recommendations and do not forget about the ventilation of the building constructions.

Read more...